Wakesurf

For years, Stretch has been collaborating with the most innovative wakesurfers to make a board worthy of a true surf style. Through team feedback, technology and over 30 years of board building know-how, the result is the Stretch Wakesurfer. The ultimate, high performance, customizable, hand-crafted EPS/EPOXY wakesurf model that's got "POP!".

Recommended sizes

  • Riders 155 lbs. 5'3" x 19.25" x 2.0"
  • Riders 170 lbs. 5'4" x 19.5" x 2.0"
  • Riders 185 lbs. 5'5" x 19.75" x 2.0"

Custom sizes available from 5'2"-5'6"

Tail Options

Available as squash, bat, diamond, moon, or swallow.

Winged: Single wing comes standard on our wakesurfer with the option too add double wings. These will pull in the wide tail outline at the fins as a way to break the water along the rail line and add quick response and maneuverability in tight pockets.

Fin Options

We recommend this board with "fuller" fins from 4 3/8" to 4 1/2" fronts with 3 1/4" rears.

Outline

Our wakesurfer is a custom surfboard outline that has been optimized to get the most performance from a shorter length on a minimal wave face. It has moderately wide outline with an ample tail block and a wing 12" from the tail.

Rocker

An extremely straight centerline rocker connects to a flat tail rocker for greater inherent speed in a shorter board. The consistent rail rocker is accentuated in the tail as shown with the generous vee.

Rails

Fairly thin, round, "ball bearing" rails come down off a flat deck. Combined with the hard edge at the fins, these rails allow for grip in the flats and explosive release when you want that extra "pop" off the top.

Bottom

Slight vee in the nose to a really deep single concave exiting through a very pronounced vee out the tail.

Construction

  • 2.1 pcf density EPS core
  • Single 6oz. fiberglass bottom
  • Double 6oz. fiberglass deck
  • 3/24" triple ply basswood stringer
  • Durable, custom, hand-made construction weighs 5 lbs.
  • Made in Santa Cruz, CA USA

Contact us for more information